What Is a Ladder Wrap?

A ladder wrap is a reflective covering applied to the beam of a ground ladder to mark the tip, balance point, and heel. Departments use them to identify ladders by company, find them fast in smoke and darkness, and know where to lift without measuring. Firehouse Pride ladder wraps are custom printed on 3M reflective material and wrap three sides of the beam, cut to leave NFPA-required ladder markings and heat sensor labels uncovered.

What Makes Our Ladder Wraps Different

3M reflective material

3M reflective material

We print on 3M reflective material, so tips, balance points, and heels catch light from every angle, in smoke and in the dark.

Built for fireground conditions

Built for fireground conditions

Heavy-duty protective layers over the reflective face. We have wraps still in service after 10 years and hundreds of working fires.

Cut to fit your ladder

Cut to fit your ladder

We did the measuring, ladder by ladder. The 3-sided wrap seats on the beam and leaves NFPA-required markings and heat sensor labels uncovered.

Fully custom

Fully custom

Any color to match your department; 7 font options. Add your department logo plus custom tip, balance, and heel text.

Lasts the life of the ladder

Lasts the life of the ladder

A set of wraps can last as long as the ground ladder it's on. Lifespan comes down to use, but a decade in service is normal.

Burned off? We replace them.

Burned off? We replace them.

If a fire destroys your wraps in service, send us photos and we send replacements. It doesn't happen often.

Built by Firefighters, for Firefighters

Firehouse Pride was founded in 2011 by firefighters who were tired of repainting ladder tips. We built ladder wraps for our own ladders first.

We replaced the paint with ultra-reflective material, cut it to wrap three sides of the beam, and made every one custom, so a department could put its own name, colors, and logo on its ladders.

More than a decade later, those wraps are on ladders in some of the busiest houses in the country. Thousands of fires, countless hours of drills, and they're still going strong.

Built by Firefighters, for Firefighters

How It Works

01

Design your wraps.
Pick your colors, font, text, and logo online. Or email or DM us and we'll build the order for you.

02

Approve your proof.
Our print shop creates a digital proof. Approve it or request changes. Nothing is printed until you sign off.

03

Install and go.
Your wraps ship with tracking. Most crews install a full set within one hour.

If a Fire Destroys Your Wraps, We Replace Them

Throw the ladder to a window, the room goes, and the tip decals burn off. That is exactly what this covers. Send us photos and we send replacements, free. It rarely happens, which is the point.

Outfitting More Than One Truck?

Many departments start with one rig and come back to outfit every ladder they have. We can match your design across your whole fleet so every apparatus looks the same.

Need a quote or a purchase order? We'll put it together for you.

Ladder Wrap FAQs

Will the wraps cover my ladder's NFPA markings or heat sensors?

No. Our 3-sided wrap is cut to leave NFPA-required ladder markings, manufacturer labels, and heat sensor labels uncovered. Getting that clearance right on every ladder style is most of the work behind the product.

How long do ladder wraps last?

A set of Firehouse Pride ladder wraps can last the life of the ground ladder. Lifespan depends on how hard the ladder works, but we have wraps still in service after more than 10 years and hundreds of working fires.

What if a fire destroys my wraps?

We replace them free. The guarantee covers wraps destroyed in service at a fire, for example a ladder thrown to a window that then becomes fully involved and burns the tip decals off. Email marketing@firehousepride.com with photos of the damaged wraps, your department name, and the original order number if you have it.

What are Firehouse Pride ladder wraps made of?

We print on 3M reflective material and finish every wrap with heavy-duty protective layers built for fireground conditions.

Why not just have a local sign shop cut us some decals?

You can, but the hard part isn't the printing. It's knowing the measurements for each ladder style, where the wrap can and can't sit so NFPA markings and heat sensors stay visible, and which materials survive a fire instead of peeling after a season. We worked that out over more than a decade on our own ladders.

Which wrap fits my ladder?

Smooth-beam ladders (like Duo Safety) use Solid Beam wraps. Ladders with raised beam sections (like Alco-Lite) use Pumper Style wraps. Straight ladders with roof hooks on both ends use the Double Tip kit. Send us a photo if you're unsure.

What file should I upload for our logo?

A vector PDF works best. High-quality JPEG and PNG files also work. If your logo needs to be redrawn, there's an additional fee starting at $25.

Will I see my design before it's printed?

Yes. Every order gets a digital proof, and nothing goes to print until you approve it.

How long does it take to get my wraps?

Shipping can take anywhere from a few days to a week after the wrap designs have been approved.